Notice:
1. This is the DIY version that comes unassembled.
2. Comes without battery, charger, receiver or radio transmitter.
Specification: (Manual)
Item Name: 2.5 Inch DIY FPV Racing Drone
Version: PNP ( Without Receiver, Battery and Radio Transmitter)
Drone Wheelbase: 105mm
Arm Plate Thickness: 2mm
Max. Propeller: 2.5 Inch
Material: 3K Carbon Fiber & 3D Printed TPU Parts
Weight: 47.9g ( without battery)
Eachine Tyro69
|
Main control chip: STM32F411
IMU: MPU6000
Integrated Betaflight OSD
Firmware: MatekF411 SBUS/ IBUS/ DSMX / UART Shared: UART1-RX
BEC: 5V 2A WS2812 Led Strip : Yes
Beeper : Yes
Mounting Hole: 20x20mm – Support betaflight/ cleanflight/ inav firmware – Plugs connector / Soldering Pads are Optional for all connector Port |
|
| Eachine 20A BL_S 4In1 ESC | MCU:48MHz EFM8BB21F16G Input Voltage: 2-6S Con. Current: 20A Burst Current: 25A (10S) BEC: NO Size: 28.7×30.7mm Mounting Hole: 20x20mm Weight: 24g Support DShot150/300/600, PWM, OneShot125, OneShot42, MultiShot ( DShot600 in default out from factory) |
| Eachine 1104 8600KV 2-3S Motor |
KV: 8600KV
Lipo cell: 2-3S
Weight: 4.3g
Color: Orange Max. Con. Current: 13A Max. Con. Power: 144W Configu-ration: 9N/12P Motor Resistance: 137mΩ Stator Diameter: 11mm Stator Thickness: 4mm Motor Diameter: 13.8mm Motor Body Length: 11.5mm Overall Shaft Length: 17mm Bolt Holes Spacing: 9mm Bolt Thread: M2 |
| 65mm 2-Blade Propeller | Item Name: 65mm 2-Blade Propeller Shaft: 1.5mm Quantity: 10 CW & 10 CCW Color: Transparent Black / Black/ Red ( Sends Randomly ) |
| Caddx Beetle V2 Camera AIO VTX | Output Power: 25mW Channel: 48CH Input Voltage: 2.9-5.5V Support SmartAudio VTX Size: 15x14mm |
|
Image Sensor: 1/3 CMOS
Horizontal Resolution: 1200 TVL
TV System: PAL
Image: 4:3
Lens: 2.1mm
Dimensions: 14x14x16mm
Weight: 4.1g (Camera + VTX)
|
|
| Recommend Lipo Battery ( Not Included) | Recommend 3S 350-450mAh Lipo Battery |
Coupon BG : BGTR69, AFFBG10, AFfbG10, BGEach10
